ГЕРМЕТИЗИРУЮЩИЕ МАСТИКИ ХОЛОДНОГО ТВЕРДЕНИЯ ДЛЯ СТРОИТЕЛЬНОЙ ИНДУСТРИИ НА ОСНОВЕ ПОЛИУРЕТАНОВЫХ СВЯЗУЮЩИХ

Volodymyr Grishchenko; Valerii Muzhev; Volodymyr Myshak; Vitalii Boiko; Veronika Ageeva; Serhiy Cherevko

doi:10.48076/2413-9890.2018-97-13

Authors

Volodymyr Grishchenko Institute of Macromolecular Chemistry
Valerii Muzhev Institute of Macromolecular Chemistry
Volodymyr Myshak Institute of Macromolecular Chemistry
Vitalii Boiko Institute of Macromolecular Chemistry
Veronika Ageeva Institute of Macromolecular Chemistry
Serhiy Cherevko TOV «Accent CK»

DOI:

https://doi.org/10.48076/2413-9890.2018-97-13

Keywords:

cold curing sealing mastics, polyurethane materials, kinetics of curing, catalysts, physical and mechanical properties

Abstract

Highly effective in the process of operation and technological when applied, two-component sealing mastics of cold curing of domestic production on the basis of polyurethane binders for their use in the construction industry of Ukraine during the erection and repair of residential and industrial buildings have been worked out. Kinetic measurements of the curing sealant working compositions were performed depending on the catalyst concentration, molecular weights and the nature of the oligomer blocks of the cross-linking agents. The physical and mechanical properties of sealing materials have been studied.

Metrics

Metrics Loading ...

References

Handbook of Sealant Technology / K.L. Mittal and A. Pizzi (Ed.), Boca Raton: CRC Press, Taylor and Francis Group. 2009. – 498 p. – ISBN 978–0–8493–9162–0.

Handbook of Adhesives and Sealants, Vol. 1 / Philippe Cognard (Ed.), Amsterdam: Elsevier. 2005. – 511 p. – ISBN 978–0–08–044554–3.

Handbook of Adhesives and Sealants, Vol. 2 / Philippe Cognard (Ed.), Amsterdam: Elsevier. 2006. – 512 p. – ISBN 978–0–08–044708–7.

Клеи и герметики / Под ред. Д.А. Кардашова. – М.: Химия, 1978.– 200 с.

Булатов Г.А. Полиуретаны в современной технике.– М: Машиностроение. 1983.– 272с.

Новые защитно–герметезирующие полиуретаные мате- риалы, не содержащие растворителей/ А.Л. Лабутин, В.С. Шитов, Э.Д. Жабин и др. – Ленинград. ЛДНТП, 1978. –20 с.

Композиционные материалы на основе полиурета- нов: Пер. с англ./ Под ред. Ф.А. Шутова. – М.: Химия. 1982.– 240 с.

Pat. 2007/0043198 A1 USA, IC C08G 18/00. Paintabletwo–component polyurethane sealant / E.J. Madaj. – Publ. 22.02.2007.

Pat. 2004/0198900 A1 USA, IC7 C08K 3/00. Two part

polyurethane sealant composition with low modulus and good paintability / E.J. Madaj. – Publ. 07.10.2004.

Pat. 4318959 USA, IC3 D02G 3/00. Low–modulus polyurethane joint sealant / R.M. Evans, T.M. Leonard. – Publ. 9.03.1982

Торопцева А.М., Белогородская К.В., Бондаренко В.М. Лабораторній практикум по химии и технологии вы- сокомолекулярных соединений/Под ред. А.Ф.Нико- лаева. – Л.:Химия.1972. – 416 с.

Саундерс Дж. Х., Фриш К. К. Химия полиуретанов / Под ред. С. Г. Энтелиса – М.: Химия, 1968. – 470 с.

Silva Ana L., Bordado J. C. Recent developments in polyurethane catalysis: catalytic mechanisms review // Catalysis Rev. – 2004. – Vol. 46. – P. 31–51.

Липатов Ю.С., Керча Ю.Ю., Сергеева Л.М. Структура и свойства полиуретанов. – Киев.:Наук. думка. 1970. – 280 с.

Райт П., Камминг А. Полиуретановые эластомеры. – Ленинград: Химия. 1973. – 304 с.